Welcome to WildBuggies!

Do you like lifted golf carts? Or anything else you would classify as a Wild Buggy? Then join and discuss everything related to Wild Buggies.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
Thanks for visiting Us!
Welcome to WildBuggies

Do you like customizing your golf cart? Or anything else you deem as a Wild Buggy. Or just looking for help with any issues? join and we'll help each other, it takes less than 30 seconds! Everybody is welcome here. This Notice will disappear once Registered!

Click here for a FREE account

Columbia par car upgrades

Discussion in 'Misc. Gas Golf Carts' started by TimC, Oct 23, 2019.

  1. 3 questions. These pertain to a 1991 columbia par car gas

    1. I have a cool steering wheel I would like to install but the mounting hole is bigger than stock. Is there a kit or something to fit after market steering wheels on?

    2. In order to put a Honda wheel (4x110 I believe) wheel on is there a certain offset I need to look for because i have drum brakes? Looking at sport quat wheels because the utility wheels are just a little bit too big

    3. Are there any suspension upgrades I can do? The suspension sucks and I haven't figured out how to build a lift kit for it yet
     
  2. 1. I have a cool steering wheel I would like to install but the mounting hole is bigger than stock. Is there a kit or something to fit after market steering wheels on?
    look on amazon for golf cart steering wheel adaptors
    https://www.amazon.com/s?k=golf+cart+steering+wheel+adaptors&ref=nb_sb_noss
    2. In order to put a Honda wheel (4x110 I believe) wheel on is there a certain offset I need to look for because i have drum brakes? Looking at sport quat wheels because the utility wheels are just a little bit too big
    i do not know the offset
    a wheel with a 4+3 offset will measure 4" from the inside lip to the center of the rim where the hub and rim meet, and then it will measure 3" from the hub to the outside lip.

    3. Are there any suspension upgrades I can do? The suspension sucks and I haven't figured out how to build a lift kit for it yet
    there is nothing for suspension ... 96 and up yes
    for the lift ... i have seen a few homemade
    the front cut the frame tubes in the front, used a 1/4" plate to drop the rack and welded it back to the riser plate with gussets.
    here is a rear homemade

    rear

    IMG_0741.JPG

    lift parcar.png


    front
    lift parca f.png
     
  3. Awesome. Thanks for the info. I saw that lift posted in the past. I'm just not sure if I want to go hacking up the frame quite yet...lol
     

Share This Page