got a 2018 ezgo txt that will mot go
solenoid will not engage ... changed solenoid ... nothing
changed micro switch in ITC ... old one dead ... nothing
checked key switch ... good with 39.5 volts
checked micro switches in F/R controller ... both good
all cables are good
batteries are 39.5 volts
any ideas ??
solenoid will not engage ... changed solenoid ... nothing
changed micro switch in ITC ... old one dead ... nothing
checked key switch ... good with 39.5 volts
checked micro switches in F/R controller ... both good
all cables are good
batteries are 39.5 volts
any ideas ??